HÜDIG-Irrigation Systems for the Agriculture

Irrigation Machine for the Agricultur

In the history of irrigation machines HÜDIG set the benchmark. Since almost more than 100 years the experiences coming from the agriculture are used in our engineering and in the developing of our irrigation products. 

HÜDIG Irrigation Machines advertise this in the daily challenge.  

The target specifications of our irrigation machines are expressed by the user directly to our engineering-department. Beside a reliable operational method, a simple handling and short set-up time are the criteria for the decision to investigate in Hüdig irrigation equipment. The machines are used in the agricultural irrigation, in the sewage treatment and for the dust-control in the surface mining. A total of 3,500 operating hours p.a. are no curiosity.  

The HÜDIG - Irrigation Machines persuade by a perfected technique and the used long-lasting components. There are still several reliable HÜDIG irrigation machines for now than 30 years and more in operation.

The Range of HÜDIG Iromat

IROMAT I
General Dates
Length mm: 5100
Width mm: 2400
Height mm: 3350
Gauge mm: 1500-2000
Empty Weight kg: 2085
Chassis Clearance mm: 470
Tyres: 260/70-15,3 14PR

Electronic Entrainment Control

A fundamental requirement to modern Irrigation Machines is to realize a simple handling together with a constant irrigation-intensity. This requirement is optimal ensured by the HÜDIG electronic entrainment control. A customized post- and pre-irrigation-time is selectable.
According to the conditions of the water-supply entrainment-speeds of 5 to 60 m/h are possible. 

Power-Unit

The power-unit posses a high-capacity waste-water-turbine which is driving the reel via a ring gear. This ring gear showed best practice for many years. It has proven itself to be extremely robust and does not require constant maintenance.

Additional advantage: on all machines manufactured since 2003 the HÜDIG warranty is extended to three years.  

Automatic Sprinkler Cart Lift

The optimum in setting up the machines can be reached by the automatically water-hydraulic driven sprinkler cart lifting. Before starting operation the transport security device should be unlocked and the sprinkler cart slides down and is ready for the pullout. At the end of the irrigation-procedure the sprinkler-cart will be lifted automatically and the hydraulic support-legs will be pulled in automatically. The machine is now ready for the transport.

Sprinkler Cart

The HÜDIG engineered sprinkler-cart posses a level-control and is famous for the extraordinary directional stability also in non-planar terrain. By the use of a parallelogram linkage the so-called diving of the sprinkler is terminated at the end of the process.

Gun Sprinkler

Equipped as standard on the IRROMAT I is the KOMET Gun Sprinkler Type TWIN 101 Ultra.

On request other Gun Sprinkler out of the KOMET-range or from other sprinkler-manufacturer are possible. 

Accessories

Individual configurations can be accomplished by a wide range of HÜDIG accessories:

  • Pipe routing device
  • Lighting
  • Solar Power Device for charging of the battery
  • Turn table with locking device
  • Charge and Discharge hoses
  • Quick-coupling accessories and pipes
  • Pump-Units
  • Gun Sprinkler at own option
  • Sprinkler Cart for high Corn Application
  • Compressed air brake system
IROMAT II
General Dates
Length mm: 5800
Width mm: 2750
Height mm: 3700
Gauge mm: 1500-2000
Empty Weight kg: 2735
Chassis Clearance mm: 485
Tyres: 260/70-15.3 AW 14PR

Electronic Entrainment Control

A fundamental requirement to modern Irrigation Machines is to realize a simple handling together with a constant irrigation-intensity. This requirement is optimal ensured by the HÜDIG electronic entrainment control. A customized post- and pre-irrigation-time is selectable.

According to the conditions of the water-supply entrainment-speeds of 5 to 60 m/h are possible. 

Power-Unit

The turbine and the gearbox are combined to one unit. By the improvement of the efficiency factor the operator gets the possibility using the sufficient entrainment-speed by efficient low water-pressure. The entrainment-speed is controlled by a sensor at the gearbox. 

Chassis

The IROMAT II is equipped in connection with the length of the PE-hose with a single-axle or dual-axle chassis. The dual-axle-chassis distinguished itself by comfortable adjusting to all roughness on field and road to the benefit of the safety.

The chassis posses the possibility of adaptation of the wheel tracks from 1500 to 1800 mm. Factory-made the track is adjusted to 1800 mm. In case you require a different wheel track, please make this subject of your order.  

Turn Table

On request the IROMAT II can be equipped with a turn table. In standard the swing will be executed manually. The reel is swivelling 145 ° to each side.

A hydraulic gear of the turn table is available as accessory kit with extra charges. 

Automatic Sprinkler Cart Lift

The optimum in setting up the machines can be reached by the automatically water-hydraulic driven sprinkler cart lifting. Before starting operation the transport security device should be unlocked and the sprinkler cart slides down and is ready for the pullout. At the end of the irrigation-procedure the sprinkler-cart will be lifted automatically and the hydraulic support-legs will be pulled in automatically. The machine is now ready for the transport.

Sprinkler Cart

The HÜDIG engineered sprinkler-cart posses a level-control and is famous for the extraordinary directional stability also in non-planar terrain. By the use of a parallelogram linkage the so-called diving of the sprinkler is terminated at the end of the process.

Special Sprinkler Cart for High Corn Application

High crops (for example maize) require high installation of the sprinkler onto the  sprinkler-cart (up to 2.4 m) and the so arising hinge moment should be constantly and reliable integrated into the engineering of the sprinkler-cart. HÜDIG provides an innovation which still allows the operator lifting up the cart after the irrigation process. The necessary counter-balance is water in a pressure vessel during operation. At the end of the irrigation process and in the depressurised stage the vessel empty itself automatically by an existing pressure control valve. 

Gun Sprinkler

Equipped as standard on the IRROMAT II is the KOMET Gun Sprinkler Type TWIN 140 Ultra.

On request other Gun Sprinkler out of the KOMET-range or from other sprinkler-manufacturer are possible. 

Accessories

Individual configurations can be accomplished by a wide range of HÜDIG accessories:

  • Pipe routing device
  • Lighting
  • Solar Power Device for charging of the battery
  • Turn table with locking device
  • Hydraulic drive for turn-table
  • Hydraulic support leg front
  • Charge and Discharge hoses
  • Quick-coupling accessories and pipes
  • Pump-Units
  • Gun Sprinkler at own option
  • Sprinkler Cart for high Corn Application
  • Compressed air brake system
IROMAT III
General Dates
Length mm: 6250
Width mm: 2890
Height mm: 4000
Gauge mm: 1800-2250
Empty Weight kg: 3380
Chassis Clearance mm: 465
Tyres: 260/70-15.3 AW 14PR

Electronic Entrainment Control

A fundamental requirement to modern Irrigation Machines is to realize a simple handling together with a constant irrigation-intensity. This requirement is optimal ensured by the HÜDIG electronic entrainment control. A customized post- and pre-irrigation-time is selectable.

According to the conditions of the water-supply entrainment-speeds of 5 to 60 m/h are possible. 

Power-Unit

The turbine and the gearbox are combined to one unit. By the improvement of the efficiency factor the operator gets the possibility using the sufficient entrainment-speed by efficient low water-pressure. The entrainment-speed is controlled by a sensor at the gearbox. 

Chassis

The IROMAT III is equipped in connection with the length of the PE-hose with a single-axle or dual-axle chassis. The dual-axle-chassis distinguished itself by comfortable adjusting to all roughness on field and road to the benefit of the safety.

The chassis posses the possibility of adaptation of the wheel tracks from 1800 to 2250 mm. Factory-made the track is adjusted to 1800 mm. In case you require a different wheel track, please make this subject of your order.  

Turn Table

On request the IROMAT III can be equipped with a turn table. In standard the swing will be executed manually. The reel is swivelling 145 ° to each side.

A hydraulic gear of the turn table is available as accessory kit with extra charges. 

Automatic Sprinkler Cart Lift

The optimum in setting up the machines can be reached by the automatically water-hydraulic driven sprinkler cart lifting. Before starting operation the transport security device should be unlocked and the sprinkler cart slides down and is ready for the pullout. At the end of the irrigation-procedure the sprinkler-cart will be lifted automatically and stored in the transport-suspension. The transport-safety-lever should be turned over. The hydraulic support-legs should be pulled in and the machine will be hooked up ready for transport.

Sprinkler Cart

The HÜDIG engineered sprinkler-cart posses a level-control and is famous for the extraordinary directional stability also in non-planar terrain. By the use of a parallelogram linkage the so-called diving of the sprinkler is terminated at the end of the process.

Special Sprinkler Cart for High Corn Application

High crops (for example maize) require high installation of the sprinkler onto the  sprinkler-cart (up to 2.4 m) and the so arising hinge moment should be constantly and reliable integrated into the engineering of the sprinkler-cart. HÜDIG provides an innovation which still allows the operator lifting up the cart after the irrigation process. The necessary counter-balance is water in a pressure vessel during operation. At the end of the irrigation process and in the depressurised stage the vessel empty itself automatically by an existing pressure control valve. 

Gun Sprinkler

Equipped as standard on the IRROMAT III is the KOMET Gun Sprinkler Type TWIN 160 Ultra.

On request other Gun Sprinkler out of the KOMET-range or from other sprinkler-manufacturer are possible. 

Accessories

Individual configurations can be accomplished by a wide range of HÜDIG accessories:

  • Pipe routing device
  • Lighting
  • Solar Power Device for charging of the battery
  • Turn table with locking device
  • Hydraulic drive for turn-table
  • Hydraulic support leg front
  • Charge and Discharge hoses
  • Quick-coupling accessories and pipes
  • Pump-Units
  • Gun Sprinkler at own option
  • Sprinkler Cart for high Corn Application
  • Compressed air brake system
IROMAT IV
General Dates
Length mm: 6750
Width mm: 3000
Height mm: 4320
Gauge mm: 1800-2250
Empty Weight kg: 4254
Chassis Clearance mm: 500
Tyres: 11,5/80-15,3 14PR

Electronic Entrainment Control

A fundamental requirement to modern Irrigation Machines is to realize a simple handling together with a constant irrigation-intensity. This requirement is optimal ensured by the HÜDIG electronic entrainment control. A customized post- and pre-irrigation-time is selectable.

According to the conditions of the water-supply entrainment-speeds of 5 to 60 m/h are possible.

Power-Unit

The turbine and the gearbox are combined to one unit. By the improvement of the efficiency factor the operator gets the possibility using the sufficient entrainment-speed by efficient low water-pressure. The entrainment-speed is controlled by a sensor at the gearbox. 

Chassis

The IROMAT IV is equipped in connection with the length of the PE-hose with a single-axle or dual-axle chassis. The dual-axle-chassis distinguished itself by comfortable adjusting to all roughness on field and road to the benefit of the safety.

The chassis posses the possibility of adaptation of the wheel tracks from 1800 to 2250 mm. Factory-made the track is adjusted to 1800 mm. In case you require a different wheel track, please make this subject of your order.  

Turn Table

The IROMAT IV is equipped with a hydraulic driven turn table. The reel is swivelling 145 ° to each side. 

Automatic Sprinkler Cart Lift

The optimum in setting up the machines can be reached by the automatically water-hydraulic driven sprinkler cart lifting. Before starting operation the transport security device should be unlocked and the sprinkler cart slides down and is ready for the pullout. At the end of the irrigation-procedure the sprinkler-cart will be lifted automatically and stored in the transport-suspension. The transport-safety-lever should be turned over. The hydraulic support-legs should be pulled in and the machine will be hooked up ready for transport.

Sprinkler Cart

The HÜDIG engineered sprinkler-cart posses a level-control and is famous for the extraordinary directional stability also in non-planar terrain. By the use of a parallelogram linkage the so-called diving of the sprinkler is terminated at the end of the process.

Special Sprinkler Cart for High Corn Application

High crops (for example maize) require high installation of the sprinkler onto the  sprinkler-cart (up to 2.4 m) and the so arising hinge moment should be constantly and reliable integrated into the engineering of the sprinkler-cart. HÜDIG provides an innovation which still allows the operator lifting up the cart after the irrigation process. The necessary counter-balance is water in a pressure vessel during operation. At the end of the irrigation process and in the depressurised stage the vessel empty itself automatically by an existing pressure control valve. 

Gun Sprinkler

Equipped as standard on the IRROMAT IV is the KOMET Gun Sprinkler Type TWIN 202 Ultra.

On request other Gun Sprinkler out of the KOMET-range or from other sprinkler-manufacturer are possible. 

Accessories

Individual configurations can be accomplished by a wide range of HÜDIG accessories:

  • Pipe routing device
  • Lighting
  • Solar Power Device for charging of the battery
  • Hydraulic support leg front
  • Charge and Discharge hoses
  • Quick-coupling accessories and pipes
  • Pump-Units
  • Gun Sprinkler at own option
  • Sprinkler Cart for high Corn Application
  • Compressed air brake system
IROMAT V
General Dates
Length mm: 6540
Width mm: 3000
Height mm: 4300
Gauge mm: 2250
Empty Weight kg: 5910
Chassis Clearance mm: 630
Tyres: 15.00/55-17AW 18PR

Electronic Entrainment Control

A fundamental requirement to modern Irrigation Machines is to realize a simple handling together with a constant irrigation-intensity. This requirement is optimal ensured by the HÜDIG electronic entrainment control. A customized post- and pre-irrigation-time is selectable.

According to the conditions of the water-supply entrainment-speeds of 5 to 60 m/h are possible.

Power-Unit

The turbine and the gearbox are combined to one unit. By the improvement of the efficiency factor the operator gets the possibility using the sufficient entrainment-speed by efficient low water-pressure. The entrainment-speed is controlled by a sensor at the gearbox. 

Chassis

The IROMAT V is equipped in connection with the length of the PE-hose with a single-axle or dual-axle chassis. The dual-axle-chassis distinguished itself by comfortable adjusting to all roughness on field and road to the benefit of the safety.

The chassis posses the possibility of adaptation of the wheel tracks from 2250 mm. 

Automatic Sprinkler Cart Lift

The optimum in setting up the machines can be reached by the automatically water-hydraulic driven sprinkler cart lifting. Before starting operation the transport security device should be unlocked and the sprinkler cart slides down and is ready for the pullout. At the end of the irrigation-procedure the sprinkler-cart will be lifted automatically and stored in the transport-suspension. The transport-safety-lever should be turned over. The hydraulic support-legs should be pulled in and the machine will be hooked up ready for transport.

Sprinkler Cart

The HÜDIG engineered sprinkler-cart posses a level-control and is famous for the extraordinary directional stability also in non-planar terrain. By the use of a parallelogram linkage the so-called diving of the sprinkler is terminated at the end of the process.

Special Sprinkler Cart for High Corn Application

High crops (for example maize) require high installation of the sprinkler onto the  sprinkler-cart (up to 2.4 m) and the so arising hinge moment should be constantly and reliable integrated into the engineering of the sprinkler-cart. HÜDIG provides an innovation which still allows the operator lifting up the cart after the irrigation process. The necessary counter-balance is water in a pressure vessel during operation. At the end of the irrigation process and in the depressurised stage the vessel empty itself automatically by an existing pressure control valve. 

Gun Sprinkler

Equipped as standard on the IRROMAT V is the KOMET Gun Sprinkler Type TWIN 202 Ultra.

On request other Gun Sprinkler out of the KOMET-range or from other sprinkler-manufacturer are possible. 

Accessories

Individual configurations can be accomplished by a wide range of HÜDIG accessories:

  • Pipe routing device
  • Lighting
  • Solar Power Device for charging of the battery
  • Hydraulic support leg front
  • Charge and Discharge hoses
  • Quick-coupling accessories and pipes
  • Pump-Units
  • Gun Sprinkler at own option
  • Sprinkler Cart for high Corn Application
  • Pipe guidance device, fully hydraulic