Irrigation systems for agricultural land, vegetable growing and special crops.

Irrigation

Solutions are available for special applications in the field of environmental protection for dust control and waste water treatment.

HÜDIG irrigation systems for agriculture

HÜDIG has set standards in the development of irrigation machines. For more than 100 years now, experience from agricultural irrigation has been utilised for the development and improvement of our products.

HÜDIG hose reel irrigators demonstrate this in daily practice.

The specifications for the design of HÜDIG irrigation machines are formulated by the user. In addition to reliable operation, simple operation and short set-up times are decisive criteria for the investment decision. The machines are used in agricultural irrigation, in waste water associations and also in open-cast mining operations for dust control. Here, 3,500 operating hours per year are not uncommon.

HÜDIG irrigation machines impress with their sophisticated technology and durable design elements. HÜDIG irrigation machines are still in use today and have been providing reliable service for more than 30 years.

  • IROMAT I
  • IROMAT II
  • IROMAT III
  • IROMAT IV
  • IROMAT V
Standard equipment

Central control unit

All the main control elements, the HÜDIG-Control electronic feed control and the drive unit are combined in the control centre behind a large, lockable cover. The individual elements are positioned clearly and are easily accessible. The drive unit is a free-flow turbine with a directly adapted gearbox. This combination is characterised by good efficiency. Overall, this arrangement is characterised by good operating convenience and a high degree of ease of maintenance. The HC 2.009 electronic intake control ensures uniform irrigation intensity. Pre- and post-irrigation according to the conditions can be set intuitively from 1 - max. 250 minutes. Depending on the water supply conditions, draw-in speeds of 5 - 200 m/h are possible. Furthermore, many additional options (e.g. close-range sprinklers etc.) or various intake parameters (e.g. start/stop time) can be controlled using HÜDIG-Control.

Portal axle chassis

The Iromat I has a single-axle portal axle chassis as standard. This design ensures a high ground clearance for driving through crops. An optionally available air brake system, including a TÜV certificate for obtaining an operating licence in accordance with the German Road Traffic Licensing Regulations (StVZO), ensures safe participation in road traffic. Here too, the space-saving arrangement of the necessary brake system components guarantees sufficient clearance height. The Hüdig coupling combination, designed with a standard drawbar eye, allows comfortable road transport in the drawbar on the one hand and quick repositioning of the machine in the field with the tractor rail on the other. Wide tyres size 340 / 55 - 16 are available as an option to the standard tyres size 260 / 70 - 15.3.

Automatic sprinkler trolley holder

At the end of the irrigation cycle, the sprinkler cart automatically reattaches itself (the energy is taken from the water volume flow required for irrigation). The rear support feet are manually retracted via the oil hydraulics after irrigation is complete. This convenience feature reduces set-up times to a minimum.

Sprinkler trolley

The 3-wheel sprinkler cart developed by HÜDIG has exceptional directional stability even on uneven terrain. A robust and wear-free levelling system prevents the large-area sprinkler from dipping at the end of the irrigation process. A convenient, central pulling device is available for pulling out the hose in the tractor track with a narrow field rail. For tall crops, e.g. maize, a maize sprinkler wagon can be used as an option. A 5-wheel sprinkler wagon with integrated tandem swing axle can also be used for particularly heavy-duty applications.

IROMAT I

PE-Rohrgrößen:

  • max. 440 m PE special pipe 90 x 6,7 mm
  • max. 400 m PE special pipe 100 x 7,4 mm
  • max. 300 m PE special pipe 110 x 8,2 mm

 

Other machine sizes:

IROMAT I RED

 

Technical Data:
Length [mm] 5.100
Width [mm] 2.400
Height[mm] 3.350
Track [mm] 1.500 - 2.000
Dry weight [kg] 2.085
Ground clearance [mm] 470
Tyres 260/70-15,3 14PR
Download
Standard equipment

Central control unit

All the main control elements, the HÜDIG-Control electronic feed control and the drive unit are combined in the control centre behind a large, lockable cover. The individual elements are positioned clearly and are easily accessible. The drive unit is a free-flow turbine with a directly adapted gearbox. This combination is characterised by good efficiency. Overall, this arrangement is characterised by good operating convenience and a high degree of ease of maintenance. The HC 2.009 electronic intake control ensures uniform irrigation intensity. Pre- and post-irrigation according to the conditions can be set intuitively from 1 - max. 250 minutes. Depending on the water supply conditions, draw-in speeds of 5 - 200 m/h are possible. Furthermore, many additional options (e.g. close-range sprinklers etc.) or various intake parameters (e.g. start/stop time) can be controlled using HÜDIG-Control.

Tandem swing axle

The Iromat II is equipped with a swinging tandem pendle axle as standard. The tandem axle comfortably absorbs uneven road surfaces and terrain and significantly increases overall driving safety. An air brake system including EU type approval in accordance with Regulation (EU) 167/2013 enables safe participation in road traffic.The Hüdig coupling combination, designed with a standard drawbar eye, allows comfortable road transport in the drawbar on the one hand and quick repositioning of the machine in the field with the tractor rail on the other.Wide tyres of size 340 / 55 - 16 are available as an option to the standard 260/70-15.3 tyres.

Automatic sprinkler trolley holder

At the end of the irrigation cycle, the sprinkler wagon automatically recharges (the energy is taken from the water volume flow required for irrigation). The rear support legs are retracted manually via the oil hydraulics after irrigation is complete. This convenience minimises set-up times.

Sprinkler trolley

The 3-wheel sprinkler wagon developed by HÜDIG has exceptional directional stability even on uneven terrain. A robust and wear-free levelling system prevents the large-area sprinkler from dipping at the end of the irrigation process. A convenient, central pulling device is available for pulling out the hose in the tractor track with a narrow field rail. For tall crops, e.g. maize, a maize sprinkler wagon can be used as an option. A 5-wheel sprinkler wagon with integrated tandem swing axle can also be used for particularly heavy-duty applications.

IROMAT II

PE-Rohrgrößen:

  • max. 550 m PE special pipe Ø 100 x 11-9,1-7,4 mm
  • max. 500 m PE special pipe Ø 110 x 10-8,2 mm
  • max. 370 m PE special pipe Ø 120 x 9,0 mm

 

Weitere Maschinengrößen:

IROMAT II RED

IROMAT II FLAT

IROMAT II S

 

Technical Data:
Length [mm] 5.800
Width [mm] 2.750
Height [mm] 3.700
Track [mm] 1.500 - 2.000
Dry weight [kg] 2.735
Ground clearance [mm] 485
Tyres 260/70-15.3 AW 14PR
Download
Serienausstattung

Central control unit

All the main control elements, the HÜDIG-Control electronic feed control and the drive unit are combined in the control center behind a large, lockable cover. The individual elements are positioned so that they are clearly arranged and easily accessible, and the drive unit is a free-flow turbine with a directly adapted gearbox. This combination is characterised by good efficiency. The HC 2.009 electronic retraction control ensures uniform irrigation intensity. Pre- and post-irrigation according to the conditions can be set intuitively from 1 - max. 250 minutes. Depending on the water supply conditions, draw-in speeds of 5 - 200 m/h are possible. Furthermore, many additional options (e.g. close-range sprinklers etc.) or various draw-in parameters (e.g. start/stop time) can be controlled with the help of HÜDIG-Control.

Tandem-swing axle

The Iromat III is equipped with a swinging tandem pendle axle as standard. The tandem axle comfortably absorbs uneven road surfaces and terrain and significantly increases overall driving safety. An optionally available air brake system, including a TÜV certificate for obtaining an operating licence in accordance with the German Road Traffic Licensing Regulations (StVZO), ensures safe participation in road traffic, while the Hüdig coupling combination with a standard towing eye allows comfortable road transport in the towing jaw on the one hand and quick repositioning of the machine in the field with the arable rail on the other. 340 / 55 - 16 wide tyres are available as an option to the standard 260 / 70 - 15.3 tyres.

Automatic sprinkler trolley holder

At the end of the irrigation cycle, the sprinkler wagon automatically recharges (the energy is taken from the water volume flow required for irrigation). The rear support legs are retracted manually via the oil hydraulics after irrigation is complete. This convenience minimises set-up times.

Sprinkler trolley

The 3-wheel sprinkler wagon developed by HÜDIG has exceptional tracking accuracy even on uneven terrain. A robust and wear-free levelling system prevents the large-area sprinkler from submerging at the end of the sprinkling process. A convenient, central pulling device is available for pulling the hose out of the tractor track with a narrow field rail. A maize sprinkler wagon can be used as an option for high-growing crops, e.g. maize. The use of a 5-wheel sprinkler wagon with integrated tandem swing axle is also possible for particularly heavy-duty applications.

IROMAT III

PE-Rohrgrößen:

  • max. 600 m PE special pipe 110 x 12,3 mm - 10 mm - 8,2 mm
  • max. 550 m PE special pipe 120 x 12,3 mm - 11,0 mm - 9,0 mm
  • max. 500 m PE special pipe 125 x 11,4 mm - 9,3 mm

 

Weitere Maschinengrößen:

IROMAT III RED

 

Technical Data:
Length [mm] 6.250
Width [mm] 2.890
Heigth [mm] 4.000
Track [mm] 1.800 - 2.250
Dry weight [kg] 3.380
Ground clearance [mm] 465
Tyres 260/70-15.3 AW 14PR
Download
Standard equipment

Central control unit

All the main control elements, the HÜDIG-Control electronic feed control and the drive unit are combined in the control centre behind a large, lockable cover. The individual elements are positioned clearly and are easily accessible.The drive unit is a free-flow turbine with a directly adapted gearbox. This combination is characterised by good efficiency. Overall, this arrangement is characterised by good operating convenience and a high degree of ease of maintenance.The HC 2.009 electronic intake control ensures uniform irrigation intensity. Pre- and post-irrigation according to the conditions can be set intuitively from 1 - max. 250 minutes. Depending on the water supply conditions, draw-in speeds of 5 - 200 m/h are possible. Furthermore, many additional options (e.g. close-range sprinklers etc.) or various draw-in parameters (e.g. start/stop time) can be controlled with the help of HÜDIG-Control.

Tandem swing axle

The Iromat IV is equipped with a swinging tandem pendle axle as standard. The tandem axle comfortably absorbs uneven road surfaces and terrain and significantly increases overall driving safety. An optionally available air brake system, including a TÜV certificate for obtaining an operating licence in accordance with the German Road Traffic Licensing Regulations (StVZO), ensures safe participation in road traffic, while the Hüdig coupling combination with a standard towing eye allows comfortable road transport in the towing jaw on the one hand and quick repositioning of the machine in the field with the arable rail on the other. 15.0 / 55 - 17 wide tyres are available as an option to the standard 11.5 / 80 - 15.3 tyres.

Automatic sprinkler trolley holder

At the end of the irrigation cycle, the sprinkler wagon automatically recharges (the energy is taken from the water volume flow required for irrigation). The rear support legs are retracted manually via the oil hydraulics after irrigation is complete. This convenience minimises set-up times.

Sprinkler trolley

The 3-wheel sprinkler cart developed by HÜDIG has exceptional directional stability even on uneven terrain. A robust and wear-free levelling system prevents the large-area sprinkler from dipping at the end of the irrigation process. A convenient, central pulling device is available for pulling out the hose in the tractor track with a narrow field rail. For tall crops, e.g. maize, a maize sprinkler wagon can be used as an option. A 5-wheel sprinkler cart with integrated tandem swing axle can also be used for particularly heavy-duty applications.

IROMAT IV

PE-Rohrgrößen:

  • max. 700 m PE special pipe 125 x 14,0 mm
  • max. 700 m PE special pipe 125 x 15,6 mm - 14,0 mm - 11,4 mm
  • max. 530 m PE special pipe 140 x 13,0 mm - 10,4 mm

 

Weitere Maschinengrößen:

IROMAT IV RED

 

Technical Data:
Length [mm] 6.750
Width [mm] 3.000
Height [mm] 4.320
Track [mm] 1.800 - 2.250
Dry weight [kg] 4.254
Ground clearance [mm] 500
Tyres 11,5/80-15,3 14PR
Download
Standard equipment

Central control unit

All the main control elements, the HÜDIG-Control electronic feed control and the drive unit are combined in the control centre behind a large, lockable cover. The individual elements are positioned clearly and are easily accessible.The drive unit is a free-flow turbine with a directly adapted gearbox. This combination is characterised by good efficiency. Overall, this arrangement is characterised by good operating convenience and a high degree of ease of maintenance.The HC 2.009 electronic intake control ensures uniform irrigation intensity. Pre- and post-irrigation according to the conditions can be set intuitively from 1 - max. 250 minutes. Depending on the water supply conditions, draw-in speeds of 5 - 200 m/h are possible. Furthermore, many additional options (e.g. close-range sprinklers etc.) or various draw-in parameters (e.g. start/stop time) can be controlled with the help of HÜDIG-Control.

Tandem swing axle

The Iromat V is equipped with a swinging tandem pendle axle and an air brake system as standard. The tandem axle comfortably absorbs uneven road surfaces and terrain and significantly increases overall driving safety. A 40 mm flanged drawbar eye or optional K80 flanged ball coupling ensure comfortable road transport.An optional lighting package incl. TÜV certificate for obtaining an operating licence in accordance with the German Road Traffic Licensing Regulations (StVZO) also enables safe participation in road.

Automatic sprinkler trolley holder

At the end of the irrigation cycle, the sprinkler cart automatically recharges (the energy is taken from the water volume flow required for irrigation). The rear support legs are retracted manually via the oil hydraulics after irrigation is complete. This convenience minimises set-up times.

Sprinkler trolley

The 3-wheel sprinkler cart developed by HÜDIG has exceptional directional stability even on uneven terrain. A robust and wear-free levelling system prevents the large-area sprinkler from dipping at the end of the irrigation process. A convenient, central pulling device is available for pulling out the hose in the tractor track with a narrow field rail.For tall-growing crops, e.g. maize, a maize sprinkler wagon can be used as an option. A 5-wheel sprinkler wagon with integrated tandem swing axle can also be used for particularly heavy-duty applications.

IROMAT V

PE-Rohrgrößen:

  • max. 840m PE special pipe 125 x 15,6mm - 14,0 mm -11,4 mm

 

Technical Data:
Length [mm] 6.540
Width [mm] 3.000
Height [mm] 4.300
Track [mm] 2.250
Dry weight [kg] 5.910
Ground clearance [mm] 630
Tyres 15.00/55-17AW 18PR
Download